Synthesis,Electrochemistry, and Photophysical Studies of Ruthenium(II) Polypyridine Complexes with D–π–A–π–D Type Ligands and Their Application Studies as Organic Memories

A new class of ruthenium(II) polypyridine complexes with a series of D–π–A–π–D type (D=donor, A=acceptor) ligands was synthesized and characterized by ¹H NMR spectroscopy, mass spectrometry, and elemental analysis. The photophysical and electrochemical properties of the complexes were also investigated. The newly synthesized ruthenium(II) polypyridine complexes were found to exhibit two intense absorption bands at both high‐energy (λ=333–369 nm) and low‐energy (λ=520–535 nm) regions. They are assigned as intraligand (IL) π→π* transitions of the bipyridine (bpy) and π‐conjugated bpy ligands, and IL charge‐transfer (CT) transitions from the donor to the acceptor moiety with mixing of dπ(Ru^II)→π*(bpy) and dπ(Ru^II)→π*(L) MLCT characters, respectively. In addition, all complexes were demonstrated to exhibit intense red emissions at approximately λ=727–744 nm in degassed dichloromethane at 298 K or in n‐butyronitrile glass at 77 K. Nanosecond transient absorption (TA) spectroscopy has also been carried out, establishing the presence of the charge‐separated state. In order to understand the electrochemical properties of the complexes, cyclic voltammetry has also been performed. Two quasi‐reversible oxidation couples and three quasi‐reversible reduction couples were observed. One of the ruthenium(II) complexes has been utilized in the fabrication of memory devices, in which an ON/OFF current ratio of over 10⁴ was obtained.     

Extraordinary transport behavior of gases in isothermally annealed poly(4‐methyl‐1‐pentene) membranes

Poly(4‐methyl‐1‐pentene) (PMP) membranes were modified through isothermal annealing to investigate the change of their crystalline structure and rigid and mobile amorphous fractions (RAF and MAF), assuming a three‐phase model, affected the gas transport behavior. The crystalline structure was characterized by wide‐angle X‐ray diffraction (WAXD) and small‐angle X‐ray scattering (SAXS) techniques, and the free volume properties were analyzed by positron annihilation lifetime spectroscopy. Compared with the pristine membrane, the annealed membranes show higher crystallinity; the crystals undergo partial structural change from form III to form I. The lamellar crystal thickness, rigid amorphous fraction thickness, and long period in the lamellar stacks increase with crystallinity. The annealed PMP membranes exhibit higher permeability due to the increase in larger size free volumes in MAF and higher selectivity due to the increase in smaller size free volumes in RAF, respectively. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2368–2376     

Weak Ligand‐Field Effect from Ancillary Ligands on Enhancing Single‐Ion Magnet Performance

A series of bis‐pentamethylcyclopentadienyl‐supported Dy complexes containing different ancillary ligands were synthesized and characterized. Magnetic studies showed that 1 Dy [Cp*₂DyCl(THF)], 1 Dy’ [Cp*₂DyCl₂K(THF)]_n, 2 Dy [Cp*₂DyBr(THF)], 3 Dy [Cp*₂DyI(THF)] and 4 Dy [Cp*₂DyTp] (Tp=hydrotris(1‐pyrazolyl)borate) were single‐ion magnets (SIMs). The 1D dysprosium chain 1 Dy’ exhibited a hysteresis at up to 5 K. Furthermore, 3 Dy featured the highest energy barrier (419 cm^?1) among the complexes. The effects of ancillary ligands on single‐ion magnetic properties were studied by experimental, ab initio calculations and electrostatic analysis methods in detail. These results demonstrated that the QTM rate was strongly dependent on the ancillary ligands and that a weak equatorial ligand field could be beneficial for constructing Dy‐SIMs.     

Synthesis and characterization of CaTiO3-(Sm,Nd)AlO3 microwave ceramics via sol–gel method

0.65CaTiO₃–0.35Sm_0.9Nd_0.1AlO₃ (CTSA) ceramic nanopowders were synthesized via sol–gel method using the ethylene diamine tetraacetic acid as a chelating agent. Thermal analysis, Fourier transform infrared spectroscopy and X-ray diffraction were used to character the decomposition of precursor and phase transformation process of derived oxide powders. Single phase and well-crystallized 0.65CaTiO₃–0.35Sm_0.9Nd_0.1AlO₃ powders with particle size of 30–40 nm were obtained by calcination at 800 °C. Dense ceramic was successfully obtained from the ultrafine powders sintered at 1,325 °C, almost 100 °C lower than 1,415 °C required for conventional powders. Compared with those prepared by conventional solid-state method, the CTSA ceramics derived from sol to gel process sintered at a lower temperature showed better microwave dielectric properties of ε_r ~ 39, Q × f over 50,000 GHz and small τ_f ~ ?7.1 ppm/K.     

Modification of hydrophilic channels in Nafion membranes by DMBA: Mechanism and effects on proton conductivity

Modification of proton conductive channels (PCCs) in Nafion has been achieved with the assistance of 3, 4‐dimethylbenzaldehyde (DMBA). During annealing, ionic clusters develop from small isolated spheres (1.72 nm) to wide continuous channels (5.15 nm), and the crystallinity of Nafion/DMBA membranes is also improved from 17% to 32% as shown by X‐ray diffraction. Molecular dynamic simulation reveals that hydrogen bonding and hydrophobic interaction between DMBA and Nafion work synergistically to achieve better phase separation. The morphology–property relationship shows that, versus various PCCs width, the corresponding proton conductivities vary greatly from 0.079 to 0.139 S/cm at 80 °C. By carefully tuning the width of PCCs, the proton conductivity shows an improvement of 22–34% as compared with pristine Nafion. A significant enhancement on the maximum power density is achieved for the membrane electrode assembly on Nafion/DMBA‐8h (as high as 1018 mW/cm^?2), yielding an enhancement of 39% on pristine Nafion‐8h (730 mW/cm^?2). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 52, 1107–1117     

Determination of selected polychlorinated biphenyls in soil and earthworm (Eisenia fetida) using a QuEChERS‐based method and gas chromatography with tandem MS

Soil and earthworms are important objects in soil pollution assessment and environmental behavior and toxicity study for polychlorinated biphenyls. Accelerated solvent extraction and solid‐phase extraction are generally required for the extraction and clean‐up of polychlorinated biphenyls in soil and earthworm, which are tedious and time‐consuming. In this work, a modified QuEChERS (quick, easy, cheap, effective, rugged, and safe) procedure combined with gas chromatography and triple quadrupole mass spectrometry was developed for the determination of 20 selected polychlorinated biphenyl congeners in soil and earthworm. Different extraction times, solvents, and clean‐up adsorbents were compared and optimized. The average recoveries from spiked soils ranged between 70 and 120% with satisfactory relative standard deviations for all the polychlorinated biphenyls. In earthworm, the recoveries of polychlorinated biphenyls 180, 183, and 189 were relatively low (< 70% in some spiking levels) compared to that of the other polychlorinated biphenyls. The limits of quantification were in the range of 0.01–0.05 ng/g. The method was successfully applied to the analysis of 66 agricultural soils. To our knowledge, a combined method based on QuEChERS for the determination of polychlorinated biphenyls in soil and earthworms has not been published before. The procedure proved to be simple, sensitive, efficient, and environmentally friendly.     

Synthesis of Nanoporous Ni‐Co Mixed Oxides by Thermal Decomposition of Metal‐Cyanide Coordination Polymers

A straightforward strategy to prepare nanoporous metal oxides with well‐defined shapes is highly desirable. Through thermal treatment and a proper selection of metal‐cyanide coordination polymers, nanoporous nickel‐cobalt mixed oxides with different shapes (i.e., flakes and cubes) can be easily prepared. Our nanoporous materials demonstrate high electrocatalytic activity for oxygen evolution reaction.